The Audio Innovate Online Shop
| NOTE: The Innojuster and Innofader Pro will be available for shipment starting approximately 9/9/2010. All other items are available and in stock. |
Innofader DJM-909$150.00 This is a special version of the Innofader designed to work with the Pioneer DJM-909 and DJM-707. Working samples as shown in the picture are currently available for purchase. [Add to Cart] [View Cart] |
Innofader Pioneer DJM-400 Version$165.00 This is a special Innofader which is modified to fit in a DJM-400. It includes the original Innofader kit with holes for mounting the DJM-400 fader stem plus all screws, washers, and brackets needed to do the mounting. ***Make sure to connect the Pioneer mixer connector to J13 on the MISC ADAPTER BOARD included with the Innofader. Since the Pioneer connector size is different, please make sure to remove the plastic housing from this connector carefully with a screwdriver! [Add to Cart] [View Cart] |
Innofader Pro$150.00 The Innofader Pro uses the same quality construction as the original Innofader and fits the following mixers: 1) All of the Innofader compatible mixers (except Ecler Eternal fader replacements) 2) Rane TTM-56/57 and Pioneer DJM-800 without any extra adapters. 3) All A&H Xone mixers 4) All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320) 5) Numark M series and Vestax VMC-002 without mods 6) Virtually any analog mixer that fits it, but possibly requiring mods. In addition to being compatible with a wider range of mixers, the Innofader Pro has the following improvements over the original Innofader: 1) No polarity testing is required. The Innofader Pro is a plug and play device for most mixers. 2) Works over a full +/- 15V or 0 to 30V range. 3) Allows crossfader forward reverse switching on all compatible mixers. [Add to Cart] [View Cart] |
Innojuster$40.00 Use the Innojuster with the Innofader to turn your cheap analog mixer into a pro mixer. Get more adjusment flexibilty on any mixer by tapping into the Innofader's wide range of adjustments from outside the mixer. Compatible with all Innofader models [Add to Cart] [View Cart] |
Innofader$115.00 Get the ultimate in flexibility and reliability by replacing your stock mixer fader with the new non-contact Innofader Fits many VCA mixers without mods Extremely durable construction Ultra low maintenance Never bleeds or cracks Immune to dust, smoke, heat, and moisture Wide range tension adjustment Electronic cut in and curve adjustment [Add to Cart] [View Cart] |
VMS4 cover$30.00 For the American Audio VMS4 This cover is specially fitted for the VMS4 to protect the Innofader. Replace the original plate under the crossfader with this piece when installing the Innofader. [Add to Cart] [View Cart] |
Before and After T-Shirt$25.00 Front: "Before" and "After" with knobs on top to let everyone know you've been Innofaded! Back: Innofader Logo Please specify size. Available in Large or XL. [Add to Cart] [View Cart] |
I Felt the Innofader T-Shirt$25.00 Get the original "I Felt the Innofader" with the huge logo on the front! Please specify size. Available in Large or XL. [Add to Cart] [View Cart] |
Pioneer DJM-800 installation kit$30.00 This kit includes a special adapter plate to allow the Innofader to fit in the DJM-800 without any need for drilling holes. Also include 2 special screws which are flush with the adapter plate for an ideal fit. NOTE: For USA customers, please order this item from AGI Pro DJ http://www.agiprodj.com [Add to Cart] [View Cart] |
Replacement transformer$50.00 Just in case you lost yours, we got replacements. [Add to Cart] [View Cart] |